Polishing , Finishing & Cleaning

Compact unit with full power for continuous polishing and grinding with dust collecting features. 1/2 HP motor 3450 RPMs, 6.6 amps Outside Dimensions 23" W x 191/4" Dp x 121/2" H 2 lights under hood Squirrel cage blower 1/2" straight shaft with tapered spindles Replaceable fiberglass filter 22-1/2" x 12" x 2" Electrical Requirements 220V AC CFM 165 Shipping Weight 56 lbs.

Thin grinding discs, .022" or .025" thick, composed of rubber-bonded silicon carbide with pin hole for mandrel mounting. Generally used on porcelain, ceramics, cubic zirconium, and for cutting sprues off of non-precious metal castings. All have 1/16" arbor holes. Will cut on the edge and both sides. In boxes of 100 pieces. Maximum speed: 21,000 RPM. Made in USA. For use with Miniature Screw Mandrels that have 1/16" diameter screws.

Very hard, square edge Mizzy Heatless Wheels, suitable for use on plastics as well as metals, remain cool and wear evenly to their brass hubs. Used by jewelers to produce a matte finish. All have pinholes for mandrel mounting.

Perfect for reaching very narrow areas, these rubber points are only 3 mm in diameter. Essential for touching up prongs.

As a second step, these wheels provide the final finish without rouge. Available in very fine & ultra fine grits. Wheels are 1/8" thick, cylinders are 23 mm long and have a hole in one end for threading onto tapered mandrels. 1/16" hole diameter.

These wheels and cylinders provide a smooth, scratch-free satin finish. No other rubberized abrasive can accomplish this in one step.All wheels are 1/8" thick. Cylinders have a hole in one end for threading onto tapered mandrels. 1/16" hole diameter. White colored abrasives are slightly harder, but provide the same finish as gray.

A genuine breakthrough in rubberized abrasive technology, Swifty 1-Step rubber wheels are designed to remove scratches from finished precious metal jewelry while providing, at the same time, a high polish. And they won't scratch stones. There's nothing else like it and we urge you to try some. 1/16" hole diameter. Medium green color.

Emery paper glued to handles, 11" long, 3/4" wide. Available in grits from 4/0 (finest) to 4 (coarsest).

Aluminum Oxide Separating Discs generally run cooler than Silicon Carbide Discs. For cutting cobalt and other non-precious metals. Have 1/16" arbor holes and are used with miniature mandrels. Will cut on the edge and both sides. Maximum speed: 21,000 RPM. In boxes of 100 pieces. Made in USA.