Polishing , Finishing & Cleaning

Made of finex muslin for use with rouge to produce a high finish. They have leather patches sewn in the center to provide a firm grip.

These combination spindles have both straight and tapered threaded sections for holding a variety of polishing buffs. Each includes a nut for securing buffs along the straight section. Some also also include washers.

The ends of these polishing motor arbors are tapered and threaded for holding polishing buffs. Can be installed on polishing motors with either straight or tapered shafts.

Compact unit with full power for continuous polishing and grinding with dust collecting features. 1/2 HP motor 3450 RPMs, 6.6 amps Outside Dimensions 23" W x 191/4" Dp x 121/2" H 2 lights under hood Squirrel cage blower 1/2" straight shaft with tapered spindles Replaceable fiberglass filter 22-1/2" x 12" x 2" Electrical Requirements 220V AC CFM 165 Shipping Weight 56 lbs.

Thin grinding discs, .022" or .025" thick, composed of rubber-bonded silicon carbide with pin hole for mandrel mounting. Generally used on porcelain, ceramics, cubic zirconium, and for cutting sprues off of non-precious metal castings. All have 1/16" arbor holes. Will cut on the edge and both sides. In boxes of 100 pieces. Maximum speed: 21,000 RPM. Made in USA. For use with Miniature Screw Mandrels that have 1/16" diameter screws.

Very hard, square edge Mizzy Heatless Wheels, suitable for use on plastics as well as metals, remain cool and wear evenly to their brass hubs. Used by jewelers to produce a matte finish. All have pinholes for mandrel mounting.

Perfect for reaching very narrow areas, these rubber points are only 3 mm in diameter. Essential for touching up prongs.

As a second step, these wheels provide the final finish without rouge. Available in very fine & ultra fine grits. Wheels are 1/8" thick, cylinders are 23 mm long and have a hole in one end for threading onto tapered mandrels. 1/16" hole diameter.

These wheels and cylinders provide a smooth, scratch-free satin finish. No other rubberized abrasive can accomplish this in one step.All wheels are 1/8" thick. Cylinders have a hole in one end for threading onto tapered mandrels. 1/16" hole diameter. White colored abrasives are slightly harder, but provide the same finish as gray.