Mandrels

These mandrels are used by inserting a piece of emery paper into the slot and wrapping the paper around the mandrel. Available in straight and tapered styles.

Used with polishing points. Available in 2 chuck sizes: 2 mm or 3 mm diameter. Both have 3/32" (2.35 mm) shanks.

An indispensable tool in the fabrication of hoop earrings. Measures 12" long overall and tapers from 12.5 mm up to 50 mm in dia. (1/2" to 2"). Made from solid steel and weighing almost 4 lbs.

Although used primarily to form bezels, this mandrel can be used to form a wide range of rectangular shapes. Tapers from 11.25 mm x 15.25 mm down to 4 mm x 5.25 mm. Measures 12" long overall with a 13 mm (0.512") diameter handle. Made from highly polished steel.

Made from cast steel and hand polished to provide a high degree of surface finish. Tangs measure 1-3/4" long x 1-13/16" wide x 1-11/32" high (44 x 46 x 34 mm) approximately. Can be clamped in a bench vise. Extra heavyweight.

Manufactured exclusively for The Contenti Company, this series of Bracelet Mandrels is hand polished to provide a higher degree of surface finish. No other similar Bracelet Mandrels have such smooth surfaces. And yet, these new mandrels are comparably priced. Tangs measure 1-3/4" long x 1-1/2" wide x 1-1/4" high approximately. Can be clamped in a bench vise, or fitted into our Mandrel Holder. To prevent rust, each mandrel is very lightly coated with grease, which you can easily remove with a soft cloth. Overall length is 10". Four 2" long steps in the diameters: 2-1/2" (55 mm) 2-3/8" (60 mm) 2-3/16" (63 mm) 2" (51 mm

Made from cast steel and measuring 14" long. Both models are 3" wide, tapering to 1-3/16" wide. Surfaces are very faintly porous. Choose between hexagonal and octagonal styles.

Our tapered round hardwood bracelet mandrel is ideal for shaping or removing dents and kinks on bangles or bracelets made of malleable metals. Measures 15" long overall, tapering from 2-1/2" dia. To 1-1/2".

The ideal tool for removing dents or kinks from bangles and bracelets made from soft metals. Hardwood construction with 4 steps in the diameters 2", 2.25", 2.5", and 2.75". Measures 8" long overall and weighs 1.4 lbs.

It's the ideal tool for removing dents or kinks from bangles and bracelets made from soft metals. And now it's available in an oval profile. Hardwood construction with 4 steps in the sizes 2" x 1.75", 2.375" x 2', 2.5" x 2.250", and 2.75" x 2.50". Measures 8" long overall and weighs 1.1 lbs