Mandrels

Made from hardened steel and engraved with US sizes 1 to 15 by quarter sizes. Overall length 11-1/2".

An indispensable tool in the fabrication of hoop earrings. Measures 12" long overall and tapers from 12.5 mm up to 50 mm in dia. (1/2" to 2"). Made from solid steel and weighing almost 4 lbs.

Although used primarily to form bezels, this mandrel can be used to form a wide range of rectangular shapes. Tapers from 11.25 mm x 15.25 mm down to 4 mm x 5.25 mm. Measures 12" long overall with a 13 mm (0.512") diameter handle. Made from highly polished steel.

Fashioned from steel, each mandrel tapers from 18 mm to 6 mm and is 12" long. Both mandrels are square in profile: item 320-618 has sharp corners and item 320-619 has cut corners. Each mandrel is provided with a steel adapter that screws into the handle of the mandrel which allows the user to install the mandrel into a bench vise or into a hole you've created in your work bench. Or, you can install these mandrels into our Mandrel Vise. Either arrangement permits hands-free work.

Although used primarily to form bezels, these mandrels are also used to shape decorative ornaments, making chain links, etc. Made of hardened and tempered steel. Square, rectangle, and triangle mandrels have sharp corners that you can round off yourself. All are approx. 11" long with 1/2" diameter handles. Made in pakistan.

Used for shaping custom ring shanks and stone mounting bezels. Precision made of case hardened steel. All are 12" long approximately. Handles are 1" diameter and can be used with our Bench Pin, Anvil, Mandrels, & Holder Set

Manufactured exclusively for The Contenti Company, this series of Bracelet Mandrels is hand polished to provide a higher degree of surface finish. No other similar Bracelet Mandrels have such smooth surfaces. And yet, these new mandrels are comparably priced. Tangs measure 1-3/4" long x 1-1/2" wide x 1-1/4" high approximately. Can be clamped in a bench vise, or fitted into our Mandrel Holder. To prevent rust, each mandrel is very lightly coated with grease, which you can easily remove with a soft cloth. Overall length is 10". Four 2" long steps in the diameters: 2-1/2" (55 mm) 2-3/8" (60 mm) 2-3/16" (63 mm) 2" (51 mm