Casting

All wax tubes have inside diameters of 5/8" and are 6" long. available in three hardnesses:

• Green Hard with very little flexibility. Ideal for filing and delicate engraving. Softening temperature: 230° F/110° C.
• Purple Medium hard with medium flexibility. All purpose wax is ideal for models with extensive piercing, baguettes, and air line openings. Softening temperature: 225° F/107° C.
• Blue Softer and highly flexible, this wax will take a 900 bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature: 220° F/104° C.

Height:1-1/8"

All wax tubes have inside diameters of 5/8" and are 6" long. available in three hardnesses:

• Green Hard with very little flexibility. Ideal for filing and delicate engraving. Softening temperature: 230° F/110° C.
• Purple Medium hard with medium flexibility. All purpose wax is ideal for models with extensive piercing, baguettes, and air line openings. Softening temperature: 225° F/107° C.
• Blue Softer and highly flexible, this wax will take a 900 bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature: 220° F/104° C.

A hard ceramic plate placed on the floor of your burnout furnace hearth.

for oven #160-904

 Dimensions:13" x 13" x 1/2"

These new Burnout Furnaces are the most dependable, most economical ovens available. Suitable for large commercial operations, or the small custom shop. These ovens feature brick chambers with heating elements secured in grooves inside the heating chambers to facilitate replacement. Built-in electronic temperature controllers feature push-button programming and allow up to 6 segments, or ramps, to be pre-set. Each ramp consists of: rate of heating or cooling, temperature setting in° F or° C, and hold time for that temperature. Also, a delayed start can be entered. The furnace will then run that program and hold it in memory until another program is set. Supplied with 3 permanent programs as well as complete programming capability. These furnaces are available in three sizes, all have durable, stainless steel exteriors. Maximum temperature 1700° F. Made in USA.

18" x 18" x 21.5"H
(13" x 13" x 9"H inside)

240V, 12A, 50/60 Hz

Available in three grades from hard to flexible. Each slice measures 3-3/8" x 1-1/2" with thicknesses range from 3/16" to 1".

Available in three grades from hard to flexible. Each slice measures 3-3/8" x 1-1/2" with thicknesses range from 3/16" to 1".

Available in three grades from hard to flexible. Each slice measures 3-3/8" x 1-1/2" with thicknesses range from 3/16" to 1".

Ferris Blue Wax Wires are designed to be twisted or bent to form desired patterns. Formulated to be flexible without sacrificing strength, they are offered in 6 different assortments, each of which contains approximately 4 ozs. of wax wires, 4" long. Ferris Blue Wax Wire has long been the preferred choice of modelers because of its malleability and strength. Made in USA.

Triangle (8, 10, & 12 ga.), 3 Prong (14 & 16 ga.), 4 Prong (16 & 18 ga.), 6 Prong (16 ga.)

Ferris Blue Wax Wires are designed to be twisted or bent to form desired patterns. Formulated to be flexible without sacrificing strength, they are offered in 6 different assortments, each of which contains approximately 4 ozs. of wax wires, 4" long. Ferris Blue Wax Wire has long been the preferred choice of modelers because of its malleability and strength. Made in USA.

Round (8, 12, 14 & 18 ga.), Half-Round (6, 8, 12, & 14 ga.)

Ferris Blue Wax Wires are designed to be twisted or bent to form desired patterns. Formulated to be flexible without sacrificing strength, they are offered in 6 different assortments, each of which contains approximately 4 ozs. of wax wires, 4" long. Ferris Blue Wax Wire has long been the preferred choice of modelers because of its malleability and strength. Made in USA.

Uncut Bezel (2, 4, 6, 8, & 10 ga.), Bezel (6, 8, & 10 ga.)