Casting

Available in three hardnesses:

• Green Hard with very little flexibility. Ideal for filing and delicate engraving. Softening temperature: 230° F/110° C.
• Purple Medium hard with medium flexibility. All purpose wax is ideal for models with extensive piercing, baguettes, and air line openings. Softening temperature: 225° F/107° C.
• Blue Softer and highly flexible, this wax will take a 900 bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature: 220° F/104° C.

Available in three hardnesses:

• Green Hard with very little flexibility. Ideal for filing and delicate engraving. Softening temperature: 230° F/110° C.
• Purple Medium hard with medium flexibility. All purpose wax is ideal for models with extensive piercing, baguettes, and air line openings. Softening temperature: 225° F/107° C.
• Blue Softer and highly flexible, this wax will take a 900 bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature: 220° F/104° C.

All wax tubes have inside diameters of 5/8" and are 6" long. available in three hardnesses:

• Green Hard with very little flexibility. Ideal for filing and delicate engraving. Softening temperature: 230° F/110° C.
• Purple Medium hard with medium flexibility. All purpose wax is ideal for models with extensive piercing, baguettes, and air line openings. Softening temperature: 225° F/107° C.
• Blue Softer and highly flexible, this wax will take a 900 bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature: 220° F/104° C.

Height:1-1/8"

All wax tubes have inside diameters of 5/8" and are 6" long. available in three hardnesses:

• Green Hard with very little flexibility. Ideal for filing and delicate engraving. Softening temperature: 230° F/110° C.
• Purple Medium hard with medium flexibility. All purpose wax is ideal for models with extensive piercing, baguettes, and air line openings. Softening temperature: 225° F/107° C.
• Blue Softer and highly flexible, this wax will take a 900 bend without breaking. Ideal for models with extensive piercing or thin exposed sections. Softening temperature: 220° F/104° C.

Height:1-1/8"

The furnace grate and tray simplifies the burnout procedure of lost wax casting. It is no longer necessary to remove flasks and tray, then replace flasks to avoid carbon build-upon heating elements (a primary cause of element failure). Now you merely slide the stainless steel tray from beneath the grate at the end of the wax elimination cycle and proceed with burnout. This not only protects heating elements in electric furnaces, but also protects the floor of a furnace, eliminating the need for a hearth plate. The grate is cast iron for strong support and long life.

Dimmension:18" x 18"

The furnace grate and tray simplifies the burnout procedure of lost wax casting. It is no longer necessary to remove flasks and tray, then replace flasks to avoid carbon build-upon heating elements (a primary cause of element failure). Now you merely slide the stainless steel tray from beneath the grate at the end of the wax elimination cycle and proceed with burnout. This not only protects heating elements in electric furnaces, but also protects the floor of a furnace, eliminating the need for a hearth plate. The grate is cast iron for strong support and long life.

Dimmension:12 1/2" x 12 1/2"

A hard ceramic plate placed on the floor of your burnout furnace hearth.

for oven #160-904

 Dimensions:13" x 13" x 1/2"

A hard ceramic plate placed on the floor of your burnout furnace hearth.

for oven #160-901

Dimensions: 12" x 12" x 1/2"

These new Burnout Furnaces are the most dependable, most economical ovens available. Suitable for large commercial operations, or the small custom shop. These ovens feature brick chambers with heating elements secured in grooves inside the heating chambers to facilitate replacement. Built-in electronic temperature controllers feature push-button programming and allow up to 6 segments, or ramps, to be pre-set. Each ramp consists of: rate of heating or cooling, temperature setting in° F or° C, and hold time for that temperature. Also, a delayed start can be entered. The furnace will then run that program and hold it in memory until another program is set. Supplied with 3 permanent programs as well as complete programming capability. These furnaces are available in three sizes, all have durable, stainless steel exteriors. Maximum temperature 1700° F. Made in USA.

24" x 27" x 31"H
(18" x 18" x 18"H inside)

240V, 12A, 50/60 Hz

These new Burnout Furnaces are the most dependable, most economical ovens available. Suitable for large commercial operations, or the small custom shop. These ovens feature brick chambers with heating elements secured in grooves inside the heating chambers to facilitate replacement. Built-in electronic temperature controllers feature push-button programming and allow up to 6 segments, or ramps, to be pre-set. Each ramp consists of: rate of heating or cooling, temperature setting in° F or° C, and hold time for that temperature. Also, a delayed start can be entered. The furnace will then run that program and hold it in memory until another program is set. Supplied with 3 permanent programs as well as complete programming capability. These furnaces are available in three sizes, all have durable, stainless steel exteriors. Maximum temperature 1700° F. Made in USA.

19.75" x 19" x 26.5"H
(14" x 14" x 14"H inside)

240V, 17A, 50/60 Hz